GMP PROTOPIC AUTO-540 HS - How to Use Main Devices: Feeding Area; Substrate Guide and Feeding Table

How to use the Main Devices
⑤ - Substrate Guide
To pile up substrates, this guide is to avoid paper twist trouble in feeding / alignment process.
Adjust position of guide for substrate size and stack substrates.
⑥ - Feeding Table
To pile up substrates for lamination.
Min. substrate size for stacking is "W 210mm X L 254mm" and Max. one is "W 540mm X 750mm".
Substrate length setting range is Min. "254" ~ Max. "800".
5
6
36/66