GMP PROTOPIC AUTO-540 HS - Error Messages; Sub-Screen Error Statuses

ERROR MESSAGE
Alarm for Main Drive
To release from alarm, press STOP button for 1 sec on SUB2 Mode.
Alarm for Burst Drive
To release from alarm, press STOP button for 1 sec on SUB2 Mode.
Alarm for Feeder Drive
To release from alarm, press the TABLE STOP button for 1 sec on SUB2 Mode.
Alarm for Table Drive
To release from alarm, press the RUN button on SUB mode the alarm message for 3 secs.
Error for Feeder E-Stop
Please check the Feeder E-Stop button.
E-stop and Safety Cover is opened.
Please check the E-stop, Safety Cover and Burst Safety Cover.
Table Up Limit is ON
Please check the Table Up Limit S/W.
Table Down Limit is ON
Please check the Table Down Limit S/W.
Normal Status.
TABLE DRIVE ALARM
FEEDER EMS PRESSED
LAMI EMS&COVER OPEN
TABLE UP LIMIT
TABLE LOW LIMIT
NORMAL STATUS
Cause of trouble and How to troubleshoot
ERROR MESSAGE
LAMI DRIVE ALARM
BURST DRIVE ALARM
FEEDER DRIVE ALARM
Sub-Screen ERROR Messages
31/66