GMP PROTOPIC AUTO-540 HS - Sleeking: Gloss & Matt Finish; Gloss;Matt Sleeking Process and Conditions

SLEEKING (GLOSS & MATT FINISH)
With GMP GLOSS SLEEKING FOIL & MATT SLEEKING FOIL, the surface of Toner Based Prints / Digital Prints can be
changed for higher quality of results.
Conditions for GLOSS/MATT SLEEKING FOILS
Model
Speed Set Temp.(℃) Pressure (MPa)
PROTOPIC III Series
3 110 0.5
(Table 1.1)
How to load the Foils
(Picture 1.1)
(Picture 1.2)
NOTE : This is for sleeking operation to display gloss/matt, hologram,
gold/silver foil in various effect.
The method of installation of Sleeking Idle Bar is as How to use
the Main Devices.
1.GLOSS/MATT SLEEKING
PROTOPIC AUTO- 540 HS
SLEEKING IDLE BAR
56/66