◑ If it requires to move it by caster wheel.
1. If a distance to move the laminator is less than 10m distance in the same area
2. Move the laminator gently with more than 4 persons at least. During it is moved, grip each corner of the machine.
◑ After the machine is moved
1. Lock the caster wheel and fix the machine with height adjustment legs.
2. Plug the power cord and connect the air hose.
3. Check the machine as the test operation.
WARNING : Machine weight is around 330 kgs, then be careful to move it to avoid damage / injury.
Before it is moved, power cord / air hose have to be unplugged / disconnected.
☞ Caster Wheel
Short moving in the same area is required.
☞ Height Adjustment Leg (Leveling Foot)
Leveling foot is to fix / to level the machine.
After the machine is moved on the installation place, fix the machine with spanner.
To Next Page
Loading...
