GMP PROTOPIC AUTO-540 HS - Move & Installation; Connecting the Air Compressor

MOVE & INSTALLATION
☞ How to connect
Compressed air needs to be supplied into the laminator to activate the bursting roller and pressure on the laminating roller.
NOTE : A large amount of moisture is made during the air compressor is operated.
Then, the dry filter at output of compressor must be demoisturised once a day.
Power
Plug in at Independent Power System (AC 220~240V).
How to connect Air Compressor
Insert air hose in to the air compressor
After Power On, pull the cap
upward.
Press in the direction of the arrow.
Plug in at Independent Power
System
20/66