EasyManua.ls Logo

GMP PROTOPIC AUTO-540 HS - Move & Installation; Power Connection Safety Cautions

GMP PROTOPIC AUTO-540 HS
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MOVE & INSTALLATION
Caution: This product consumes a large amount of electricity during its operation. If you connect this equipment with
a power cable with insufficient capacity or an old cable, a fire might break out due to electrical leakage.
Caution : For your safety, please make sure that it's grounded properly. If not, excessive static electricity will occur during operation
and it will even cause the malfunction of the equipment In case of malfunction or electrical leakage, there's possible danger for electrical shocks.
Caution : If you arbitrarily replace the power plug attached to the product, it might cause a serious problem to your safety.
When you would like to replace the plug, ask for help from the retailer or our service
Caution : Make sure the power is turned off before connecting to the source of electricity.
If not, there's possible danger for injury due to sudden operation of the equipment.
Caution : Do not connect other equipment simultaneously to the consent which is connected to our product.
Due to the excessive power consumption, a fire might break out.
Caution : If you make a wrong phase connection to the source of electricity, it might cause the damage to the equipment or start a fire.
Caution : Insert the plug deeply into the socket so that it won't shake. If not, it's a reason for a fire due to the abnormally heated consent.
Caution : The socket-outlet shall be installed near the equipement and shall be easily accessible.
Caution
Warning
Connection to Power

Table of Contents

Related product manuals