GMP PROTOPIC AUTO-540 HS - Safety Instructions; Grounding and Electrical Hazards; Installation and Operational Safety

Important Safety Instruction
It must be grounded for safety.
Otherwise, this could be a cause of trouble and electric shock.
Danger, Malfunction, loss of electricity could cause an electric shock
Do not pull the plug or bend improperly
☞ Installation
Do not use materials near a naked flame
Do not use the machine in the sealed place.
Only use the specified power and voltage. It can be a reason of fire flame or an electricity fire flame.
Do not dissemble, make repairs or convert the machine. Contact your dealer for repairs
Ensure all hair, neckties, necklaces, are kept free of the feeding table to avoid injury
Do not convert the safety device and safety switch.
Do not spill any liquids on the laminator as this will cause damage and a possible electric shock
Do not use the flammable spray or flammable materials inside or outside the machine. As this could cause a fire.
Do not allow children use of this equipment
4/66