81
Hyper-Threading
Hyper-Threading Control Switch, this option enables or disables the Hyper-Threading feature of Intel
processors. When this feature is enabled, each physical processor core is equivalent to two logical processor
cores; when this feature is disabled, each physical processor core is equivalent to only one logical processor
core. Enabling this feature results in a higher processor core count, improving the overall performance of the
application. The menu options are:
Enable
Disable
Default: Enable
Max CPUID Value Limit
Enabled when booting a legacy operating system that cannot support extended CPUIDs, the menu
options are:
Enable
Disable
Default: Disable
Enable Intel(R) TXT
Intel TXT function switch, the menu options are:
Enable
Disable
Default: Disable
VMX
CPU Virtualization Technology switch, if this option is enabled, the virtualization layer or operating
system that supports this option can use the hardware capabilities of Intel Virtualization Technology. Some
virtualization layers require Intel Virtualization Technology to be enabled. This option can also be left
enabled without using a hypervisor or operating system that supports this option. The menu options are:
Enable
Disable
Default: Enable
Enable SMX
Extended safe mode function switch, the menu options are:
Enable
Disable
Default: Disable
Hardware Prefetcher
Hardware prefetching means that before the CPU processes instructions or data, it prefetches these
instructions or data from memory to the L2 cache, thereby reducing memory read time, helping to eliminate
potential bottlenecks, and improving system performance. The menu options are:
Enable
Disable
Default: Enable
Adjacent Cache Prefetch
After the adjacent cache prefetch function is enabled, when the computer reads data, it will intelligently
think that the data next to or adjacent to the data to be read is also needed, so these adjacent data will be
pre-read during processing. , which can speed up reading. When the application scenario is to access memory
sequentially, enabling this function will improve performance. When the application scenario is random
access to memory, it is recommended to disable this option. The menu options are:
Enable
To Next Page
Loading...
Need help?
General
