SK200-UM-251-9370 2-2
2. PART NAMES AND FUNCTIONS
(10) EJECT key .........................Press this key to feed the document.
If this key is pressed when the scanner is in document-loaded status, the
document-loaded status is canceled and the document is ejected to the front
of the scanner.
If this key is pressed after the scanning operation has been canceled or
after scanning of the document was halted partway through the scanning
operation, the document-loaded status is canceled and the document is
ejected to the rear of the scanner.
(11) STOP key ...........................Compulsorily stops scanning of the document.
If the ERROR LED flashes when the top cover is in the closed status, press
this key to suspend the scanning operation and check whether a paper jam
has occurred.
Rear View
(12) Rear guides ........................The scanned document is aligned with these guides when it is ejected to the
front.
(13) USB connector ...................Used to connect the USB interface cable.
(14) Power inlet .........................Used to connect the power cable.
To Next Page
Loading...
