SK200-UM-251-9370 8-2
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.2 Left Side Cover
Detaching the left side cover
(1) Detach the top cover (see Section 8.1).
(2) Remove the two M4L8 TP screws on the left side of the scanner unit.
(3) Detach the left side cover.
Note:
There is a positioning pillar inside the left side cover.
Do not twist the cover when removing the cover.
Otherwise, you will break the positioning pillar.
M4L8 TP screw
Left side cover
Reattaching the left side cover
(1) Reattach the left side cover in the reverse order in which it was detached.
To Next Page
Loading...
