SK200-UM-251-9370 4-3
4. INSTALLING THE SOFTWARE
4.2 Installing the Driver Software for Windows 2000
(1) Use the USB cable to connect the scanner to the computer, and then turn on the computer.
(2) When Windows starts up, insert the CD-ROM supplied with the scanner into the CD-ROM drive. The
“Start” screen opens automatically. Click the [Quit] button to close the “Start” screen.
(3) Turn on the power to the scanner.
(4) The screen shown below appears. Click [Next] to move to the “Install Hardware Device Drivers” screen.
(5) When this screen is displayed, select the option “Search for a suitable driver for my device
(recommended)” and then click [Next] to display the “Locate Driver Files” screen.
(6) When this screen is displayed, select the check box entitled “Specify a location” and click [Next].
(7) The following screen is displayed. Click [Browse] and select the [English]-[DRIVER]- [SCANNER]
folders in the CD-ROM drive or enter a CD-ROM drive name and \English\DRIVER\SCANNER using
the keyboard.
Example: For drive D, enter “D:\English\DRIVER\SCANNER”.
Click [OK]. The wizard will start searching for the driver.
To Next Page
Loading...
