GRAPHTEC SK200-09 - Daily Maintenance; Opening and Closing the Top Cover

SK200-UM-251-9370 5-1
5. DAILY MAINTENANCE
5. DAILY MAINTENANCE
5.1 Opening and Closing the Top Cover
Opening the top cover
(1) Turn off the scanner.
(2) Push the left and right open levers on the top cover in the upward direction to unlock them, and then
open the cover fully (approximately 60 degrees).
(3) When the cover is fully open, lower it slightly to engage the top cover fixing stay that holds the top cover
in place.
2 1
Closing the top cover
(1) Raise the top cover slightly from its open status to disengage the top cover fixing stay, and then close
the cover gently.
(2) Check that the left and right levers on the top cover are locked.
2
1
Caution
Take care not to get your fingers caught when opening or closing the cover.