SK200-UM-251-9370 8-21
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.17 Feed Rollers
Detaching the feed rollers
(1) Detach the top assembly (see Section 8.16).
(2) Detach the front guide assembly (see Section 8.5).
(3) Remove the six M3L6 binding head screws holding the rear media guide.
M3L6 binding head screw
Rear media guide
(4) Detach the rear media guide.
(5) Detach the feed drive belt (see Section 8.8).
(6) Remove the two M3L12 binding head screws holding the feed pulleys.
Feed pulley
M3L12 binding head screw
M3L12 binding head screw
(7) Detach the feed pulleys from the feed rollers.
To Next Page
Loading...
