SK200-UM-251-9370 8-22
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
(8) Remove the E-rings holding the left side feed roller bearings.
M4L16 TP screw
Shaft link plate
E-ring
(9) Remove the two M4L16TP screws holding the two right side shaft link plates.
(10) Detach the bearings, collars and right side shaft link plates from the main unit.
(11) Remove the two M4L16TP screws holding the two right side shaft link plates.
M4L16 TP screw
Shaft link plate
To Next Page
Loading...
