SK200-UM-251-9370 8-34
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.24 Feed Motor
Detaching the feed motor
(1) Detach the front guide assembly (see Section 8.5).
(2) Remove the two M4L8 pan head screws with washer holding the feed motor.
M4L8 pan head screw with washer
Motor drive belt
(3) Disconnect the cable from the feed motor.
Feed motor cable
Motor mount
M4L8 binding head screw
(4) Remove the two M4L8 binding head screws holding the motor mount.
Reattaching the feed motor
(1) Reattach the feed motor in the reverse order in which it was detached.
(2) Adjust the motor drive belt tension (see Section 8.11).
To Next Page
Loading...
