SK200-UM-251-9370 8-1
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.
DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.1 Top Cover
Detaching the top cover
(1) Remove the four M4L8 binding head screws on the front side of the top cover.
M4L8 binding head screw
Top cover
(2) Remove the four M4L8 binding head screws on the rear side of the top cover.
M4L8 binding head screw
Top cover
(3) Detach the top cover from the scanner unit in the upward direction.
Reattaching the top cover
(1) Reattach the top cover in the reverse order in which it was detached.
To Next Page
Loading...
