SK200-UM-251-9370 8-19
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.16 Top Assembly
Detaching the top assembly
(1) Detach the top, left side, right side and shield covers (see Sections 8.1, 8.2, 8.3 and 8.6).
(2) Remove the M4L16 binding head screw holding the flap stay, and then disconnect the flap stay from the
main unit.
M4L16 binding head screw
Flap stay
(3) Remove the four M4L6 binding head screws holding the right and left damper brackets.
Damper
M4L6 binding head screw
Damper
M4L6 binding head screw
M4L6 binding head screw
Damper
Slide the damper to
the inside.
(4) Slide the left and right dampers to the inside to disconnect the dampers from the main unit.
To Next Page
Loading...
