SK200-UM-251-9370 5-7
5. DAILY MAINTENANCE
5.7 Scanner Calibration
Calibrate the scanner if scanning quality is observed to deteriorate, with scanned results such as those
described below
• The scanned image is distorted
• Areas of uneven color appear in the scanned image
• Other unsatisfactory results (but excluding problems related to media quality, such as folds, creases, or
paper curl)
Preparation and checks
Recommended usage environment
• Monitor: 1024 x 768 pixels, High Color or better resolution
A low-resolution monitor will make it difficult to discern any problem areas.
Launching the Scanner Adjustment Program from Scanning Arts SP
(1) Connect the scanner to the computer, turn on the scanner, and then turn on the computer.
(2) Install the Scanning Arts SP software if it is not already installed.
(3) Click the [Start] button on the Windows desktop, then select Programs > Scanning Arts SP > Scanner
Adjustment.
(4) Click Scanner Adjustment to launch the Scanner Adjustment program.
(5) Select the desired adjustment item from the Scanner menu.
To Next Page
Loading...
