SK200-UM-251-9370 5-8
5. DAILY MAINTENANCE
Launching the Scanner Adjustment Program from the TWAIN driver
(1) Connect the scanner to the computer, turn on the scanner, and then turn on the computer.
(2) Install the TWAIN driver if it is not already installed.
(3) Select “Adjust” > “Scanner Adjustment” from the TWAIN driver’s “Settings” tab. (The location of the
"Adjust" depends on the application software.)
(4) Click Scanner Adjustment to launch the Scanner Adjustment program.
(5) Select the desired adjustment item from the Scanner menu.
To Next Page
Loading...
