GRAPHTEC SK200-09 - Attaching the Rear Guides

SK200-UM-251-9370 2-3
2. PART NAMES AND FUNCTIONS
2.2 Attaching the Rear Guides
Always ensure that the rear guides are attached to the scanner unit before scanning a document, irrespective
of the type of document to be scanned.
Caution
The document may be damaged upon contact with the power cable if it is scanned without the rear guides in place.
(1) Insert the ribs on the inside of one of the rear guides into the corresponding slots at the rear of the
scanner, and then push the guide downward.
(2) Repeat the procedure for the second guide.
Checkpoint
Detach the rear guides when moving or packing the scanner. Press lightly against each guide and then lift it up to
detach it.