SK200-UM-251-9370 8-6
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.6 Shield Cover
Detaching the shield cover
(1) Detach the top cover (see Section 8.1).
(2) Remove the three M3L4 binding head screws from the access holes of the shield cover as shown in the
photographs below.
Shield cover
M3L4 binding head screw
(3) Detach the shield cover.
Reattaching the rear cover
(1) Reattach the shield cover in the reverse order in which it was detached.
To Next Page
Loading...
