SK200-UM-251-9370 8-12
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.12 Board Base Chassis
Detaching the board base chassis
(1) Detach the top and shield covers (see Sections 8.1 and 8.6).
(2) Disconnect the five CIS flexible cables from the CIS boards.
CIS flexible cable
CIS board
(3) Remove the ten M3L6 binding head screws holding the data control board and power board.
M3L6 binding head screw
Center CIS board
M2L6 binding head screw
Data control board
Power board
(4) Remove the five M3L4 binding head screws holding the board base chassis.
M3L4 binding head screw
Board base chassis
To Next Page
Loading...
