SK200-UM-251-9370 8-7
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.7 Control Panel
Detaching the control panel board
(1) Detach the top and right side covers (see Sections 8.1 and 8.3).
(2) Remove the two M3L8 self-tapping screws holding the control panel bracket.
Control panel bracket
M3L8 self-tapping screw
Right side cover
(4) Disconnect the control panel cable from the control panel board.
Reattaching the control panel board
(1) Reattach the control panel board in the reverse order in which it was detached.
To Next Page
Loading...
