SK200-UM-251-9370 8-8
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.8 Feed Drive Belt (60S2M250)
Detaching the feed drive belt
(1) Detach the top and left side covers (see Sections 8.1 and 8.2).
(2) Loosen the two M4L6 binding head screws holding the feed belt tension bracket.
(3) Detach the feed drive belt from the feed pulley.
M4L6 binding head screw
Feed drive belt
Reattaching the feed drive belt
(1) Reattach the feed drive belt by reversing the sequence of steps in which it was detached.
(2) Adjust the belt tension (see Section 8.9).
To Next Page
Loading...
