SK200-UM-251-9370 5-11
5. DAILY MAINTENANCE
Color Correction
Perform color correction if there is any discrepancy in color in parts of the scanned image even after you
have calibrated the scanner.
• Handle the color correction sheet with care so that it is does not get soiled, bent or scratched. A soiled, bent, or
scratched sheet will not give good results.
• The color correction sheet is a consumable item. It cannot be used if it is bent or soiled.
• The color correction sheet is a paper product. Do not attempt to clean it with any type of liquid cleaner.
Color correction sheet
Insertion direction
Scanner
(1) Display the Scanner menu.
Select Color Correction.
(2) Click the Scan button.
(3) The following screen is displayed. Click the [Scan] button.
(3) The following prompt is displayed. Insert the color correction sheet into the scanner as instructed.
Position the color correction sheet so that the red bar in the center of the sheet is centered in the scanner.
(4) Click the [OK] button to start scanning.
The scanned data is displayed when scanning is complete. Colors may differ slightly for individual
sensors, but this does not indicate a defect.
To Next Page
Loading...
