SK200-UM-251-9370 5-12
5. DAILY MAINTENANCE
(5) When the data is displayed, click the [Get] button.
(6) Click in the center of the color tiles indicated by the numbers 1 to 6 on the color correction sheet, in
ascending order. For numbers 1 to 5, click in the center of the upper left tile; for number 6, click in the
center of the bottom right tile. Align the cursor crosshairs with the printed reference lines beside each of
the indicated tiles.
• The next reference point to be checked is displayed on the Status bar.
• If you click in error, click the Esc. key to cancel the operation and return to the immediately previous step.
• If you click on the wrong tile, color correction will not be performed correctly and the colors of the image displayed
after color correction will be incorrect.
(7) Click the [Set] button to perform color correction.
(8) When color correction has been completed, click the [OK] button.
(9) To check the color correction results, select Color Correction from the Scanner menu, and then click the
[Confirm] button in the Color Correction screen.
To Next Page
Loading...
