SK200-UM-251-9370 5-3
5. DAILY MAINTENANCE
5.3 Cleaning the Gap Rollers
(1) Turn off the scanner.
(2) Open the top cover as described in Section 5.1, “Opening and Closing the Top Cover”.
(3) While rotating the gap rollers, wipe them clean using a soft cloth that has been moistened with water or
a neutral detergent (diluted with water) and firmly wrung out.
(4) Wipe the gap rollers once again using a soft, dry cloth to remove all the moisture.
(5) Close the top cover as described in Section 5.1, “Opening and Closing the Top Cover”.
• Take care not to get your fingers caught in the top cover.
• Scanning may be affected if the document hold-down unit becomes scratched or dirty.
To Next Page
Loading...
