GRAPHTEC SK200-09 - Position Adjustment

SK200-UM-251-9370 9-11
9. ADJUSTMENTS USING THE SOFTWARE
3. Position adjustment
Adjusting the offset (origin)
(1) Start the OPS112 software. (See p. 9-1.)
(2) Select "Adjust Position" from the "Adjust" menu.
(3) The following dialog box will appear. Correctly position the offset target chart on the scanner and click
the "Scan" button.
Use the cursor or keys to enter a value to
adjust level differences between the image sensors.
Use the cursor or keys to enter
the position of the origin.
Not used.
0
0 0 1600
1600
1200 1200 1200 1200