SK200-UM-251-9370 8-23
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
(12) Detach the bearings, collars and left side shaft link plates from the main unit.
(13) Lift up the rear part of the center media guide, slide it in the rear direction, and then detach the center
media guide from the main unit.
Center media guide
(14) Detach the four left and right side springs (AP100-024-0.9) the two front center springs (AP100-025-1.0),
and the two spring rear center springs (AP100-020-1.2) from the pressure arm.
Black spring
Front center pressure spring (AP100-025-1.0)
Left & right pressure spring (AP100-024-0.9)
Pressure arm
Rear center pressure spring (AP100-020-2.0)
Silver spring
Black spring
To Next Page
Loading...
