SK200-UM-251-9370 8-24
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
(15) Slide the feed roller to the left side, and then lift up the right side of the feed roller to detach it.
Slide the feed roller to the left side, and then lift
up the right side of the feed roller to detach it.
Front feed roller
Rear feed roller
Reattaching the feed rollers
(1) Reattach the feed rollers by reversing the sequence of steps in which they were detached.
(2) There are three kinds of springs; do not install them in the wrong positions.
AP100-024-0.9
AP100-025-1.0
AP100-020-1.2
To Next Page
Loading...
