•
PERIOD
It is used to set the speed of receiver’s output signal.
Touch “SET” icon to activate the default value, 20msec, in red and set the value to 10msec
with INC and DEC buttons. Touch “SET” icon again to deactivate the value and touch ENT
button to call “RX FAIL SAFE” setup page
Touch
Touch
Touch
Touch
Touch
56
• LIMIT -, +
The function supports the adjustment of servo’s maximum travel amount for +,- direction.
150% is set by default. Since LIMIT -, + function is regulated by SERVO EPA of transmitter, you
need to adjust SERVO EPA of transmitter to 150% to use 150% of LIMIT -, +
Touch “SET” icon to activate the value in red and adjust the value with INC and DEC buttons.
Touch “SET” icon again to deactivate the value and touch INC button to move the cursor to
“PERIOD”.
Touch
Touch
To Next Page
Loading...
Need help?
General
