GRAVOGRAPH M20 - Safety Recommendations

15
M_M20 series_EN_C
F. Safety
1. Recommendationsandsafety
 Personnelsafety
The machine is designed for light engraving only and under no circumstances should it be used for
other applications.
Do not use this marking equipment in an explosive environment.
Do not use this machine for routing or intensive cutting operations. Do not use this machine for wood
work.
Never hold the materials for engraving by the hands. Use only Gravograph clamping systems designed
for the machine.
During engraving operations, use this machine with a (regulating or suction) nose in order to prevent
󰄉yingswarf.
Donotstartengravingwithout󰄈rstensuringthattheobjecttobeengravedissecurelyclamped.
Never take hold of the material for engraving when engraving is in progress.
Interrupt engraving by means of the function provided for this purpose on the machine control panel.
Keep away from the area above the machine.
Ensure that people are kept clear of the area of travel of the moving parts of the machine and that no
objectsriskobstructingtheirmovement.
During engraving, the rotation of the spindle could present risks of burns and cuts. To prevent any risk
ofcuts,themachine'sprotectivecovermustbekeptclosedexceptforadjustmentoperations.
Warning:hazardousmovingparts-Keep󰄈ngersandotherbodypartsaway. 
Topreventanyriskofcrushing,avoidplacingthehandsinthelocationsidenti󰄈ed.
Keep clear of the tool-holder.
 Wearingsafetyglasses
Theuseofsafetyglassesisrecommendedforprotectionagainst󰄉yingswarf.