GRAVOGRAPH M20 - Preventive Maintenance; General Maintenance and Cleaning

53
M_M20 series_EN_C
K. Preventive maintenance
1. General maintenance
Unplug the power supply plug before beginning any cleaning or maintenance operation.
The mains power cable must be replaced immediately if it is cut or crushed, cracked or
a conductor is stripped bare.
Themachine'smaintenanceneedsdependonthetypeofmaterialused,thequantityofmaterialremoved,
frequency of operation, environment and the e󰘯ectiveness of the air extraction system. It is the user's
responsibilitytode󰘰nethem.
Dust and debris that accumulate on the machine's components can cause irregular or imprecise engraving, or
the loss of the engraving position and the premature failure of components.
Regularlycleaningthemachineimprovesitsoperation,extendsthelifeofpartsandreducestheriskoffailure.
Recommendations:Checkand,ifnecessary,cleanthemachineevery8hoursofengraving/markingorcutting.
For help, contact Gravotech.
Nointernalpartsofthemachinerequireuserintervention.Routinemaintenanceonlyinvolvesexternalcleaning
of the engraving area.
To clean other parts of the machine, call a Gravotech technician.
 M20 ABC: color touch screen (Touch Pad)
Wipewithasoftclothslightlydampenedwithalcohol.
Do not use organic solvents.