SERVICE MANUAL
This Manual has been prepared for and is considered part of -
RT9130E
Crane Model Number
Crane Serial Number
This Manual is Divided into the following Sections:
SECTION 1 INTRODUCTION
SECTION 2 HYDRAULIC SYSTEM
SECTION 3 ELECTRICAL SYSTEM
SECTION 4 BOOM
SECTION 5 HOIST AND COUNTERWEIGHT
SECTION 6 SWING SYSTEM
SECTION 7 POWER TRAIN
SECTION 8 UNDERCARRIAGE
SECTION 9 LUBRICATION
NOTICE
The crane serial number is the only method your distributor or the
factory has of providing you with correct parts and service informa-
tion.
The crane serial number is identified on the builder’s decal
attached to the operator’s cab. Always furnish crane serial
number when ordering parts or communicating service problems
with your distributor or the factory.
To prevent death or serious injury:
• Avoid unsafe operation and maintenance.
• This crane must be operated and maintained by trained and
experienced personnel. Manitowoc is not responsible for qualifying
these personnel.
• Do not operate or work on this crane without first reading and
understanding Operator’s Manual and Rating Plate supplied with
crane.
• Store Operator’s Manual in holder provided on crane.
• If Operator’s Manual or Capacity Charts are missing from cab,
contact your distributor for new ones.
2009 Manitowoc
Published 08-25-2009 Control # 077-04
To Next Page
Need help?
General
