English (GB)
18
* Pilot pump needs to be activated via PC Tool.
8.7.32 8.7.32 Analog inputs and measured value (4.3.8.1.1 - 4.3.8.7.1) 49
8.7.33 8.7.33 Digital outputs (4.3.9) 50
8.7.34 8.7.34 Function of digital outputs (4.3.9.1 - 4.3.9.16) 50
8.7.35 8.7.35 Analog outputs (4.3.10) 50
8.7.36 8.7.36 Output signal (4.3.10.1 - 4.3.10.3) 51
8.7.38 8.7.38 Min., max. and user-defined duty (4.3.14) 51
8.7.39 8.7.39 Min. duty (4.3.14.1) 52
8.7.40 8.7.40 Max. duty (4.3.14.2) 52
8.7.41 8.7.41 User-defined duty (4.3.14.3) 53
8.7.42 8.7.42 Pilot pump curve data (4.3.18) 53
8.7.43 8.7.43 Pump curve data (4.3.19) 54
8.7.45 8.7.45 Control source (4.3.20) 55
8.7.46 8.7.46 Fixed inlet pressure (4.3.22) 55
8.7.47 8.7.47 Flow estimation (4.3.23) 56
8.7.48 8.7.48 Reduced operation (4.3.24) 56
8.7.49 8.7.49 Multisensor settings (4.3.25) 57
8.7.52 8.7.52 Differential sensor (4.3.27) 58
8.7.54 8.7.54 Customisable measured value type (4.3.28) 59
8.7.56 8.7.56 Monitoring functions (4.4) 60
8.7.57 8.7.57 Dry-running protection (4.4.1) 61
8.7.58 8.7.58 Pressure/level switch (4.4.1.1) 61
8.7.59 8.7.59 Measurement, inlet pressure (4.4.1.2) 62
8.7.60 8.7.60 Measurement, tank level (4.4.1.3) 62
8.7.61 8.7.61 Min. pressure (4.4.2) 63
8.7.62 8.7.62 Max. pressure (4.4.3) 63
8.7.63 8.7.63 External fault (4.4.4) 64
8.7.64 8.7.64 Limit 1 exceeded (4.4.5 - 4.4.6) 64
8.7.65 8.7.65 Pumps outside duty range (4.4.7) 65
8.7.66 8.7.66 Pressure relief (4.4.8) 66
8.7.67 8.7.67 Log values (4.4.9) 66
8.7.68 8.7.68 Fault, feedback sensor (4.4.10) 67
8.7.69 8.7.69 Non-return valve (4.4.11) 67
8.7.70 8.7.70 Controlled output 1-2(4.4.13-4.4.14) 68
8.7.71 8.7.71 Functions, CU 352 (4.5) 69
8.7.72 8.7.72 Display language (4.5.1) 70
8.7.73 8.7.73 Units (4.5.2) 70
8.7.74 8.7.74 Date and time (4.5.3) 71
8.7.75 8.7.75 Password (4.5.4) 72
8.7.76 8.7.76 Ethernet (4.5.5) 72
8.7.77 8.7.77 GENIbus number (4.5.6) 73
8.7.78 8.7.78 Software status (4.5.9) 73
8.7.79 Status display menu (4.6) 73
Section Display and display number Page
To Next Page
Loading...
Need help?
General
