User Manual
25
• Once the battery is fully charged it can be used with the camera
Additional Information
• All rechargeable batteries gradually lose their charge over time when they are left in
storage. If the battery is to be left in storage or for a period of non-use, a 'top-off' charge
should be carried out prior to use
• Always remove the battery from the equipment or charger when not in use. Store the
battery in a cool and dry place
• Periodically wipe the metal battery terminals with a soft, dry cloth
• Do not attempt to open or disassemble the battery
• Do not short circuit the battery by directly connecting the metal terminals
• Ensure that no metal objects touch the terminals
Introduction to Buttons & Joystick
Button On/Off: Power supply control
Keep button On/Off depressed for 3 seconds to switch on or off the camera.
Joystick: Multiple functions
When there is no menu displayed in live thermal image, move the joystick up or down to
adjust focus and left or right to zoom in or out the image continuously. When there is no menu
displayed in frozen or saved thermal image, move the joystick in all directions to move the
centre cursor to measure temperature of any spot in the image.
Press the joystick to enter all the menus; move it up, down, left and right to toggle between
different sub-menus or menu options or to alter values of different parameters.
When there is a dialog box displayed in thermal image, press the joystick to confirm selection
To Next Page
Loading...
