User Manual
71
• Press the joystick to close the dialog box. Repeat the above operation to try it till training
succeeds.
• The same operation to the left phrases. After successful training, the respective templates
will be saved in the camera. Then after the auto speech recognition function is turned on
and the corresponding user ID is properly selected, you can control the camera by your
voice.
Note:
• To successfully train a phrase, do pronounce the phrase within 2 seconds after choosing
button Start or Again. Otherwise, the training will fail.
• Training and auto speech control are also available when using Bluetooth wireless
headset
Option Adjust
• Click option Adjust with the touch pen or press the joystick to select it. Then the Pen
Adjust interface appears on the screen
• 4 buttons Start, Exit, Save and Test are available in the interface. Pressing button S or
moving the joystick left or right can toggle between them. Clicking with the touch pen or
pressing the joystick can select them respectively.
• Select button Start to start adjustment. The a cursor appears at the left top corner of the
screen, click its center with the touch pen; then a cursor appears in the center of the
screen, click its center with the touch pen as well; finally a cursor appears at the right
bottom of the screen, click its center with the touch pen, too. Now the adjustment
succeeds and a dialog box appears to prompt the success. Press the joystick or click
button OK with the touch pen to save the adjustment.
To Next Page
Loading...
