User Manual
67
powered on and paired with the camera.
• Then set option BlueTooth to be On, the camera will search for the headset.
• Once it finds the headset, headset will work as the voice input/ output device of the
camera, which means voice recording and replay will be performed through the headset.
• After setting option BlueTooth to be Off, the headset will not act as the voice input/ output
device.
Option Default
• Click option Default with the touch pen or press the joystick to select it. Then the Default
dialog box appears on the screen
• Camera setup parameters and filter range remain the same after re-powering on the
camera. But they can be resumed to the factory configured ones when needed.
• Clicking button Yes or pressing the joystick will execute the command. Then a NUC is
performed automatically. After NUC, all the parameters and the filter range become the
factory configured ones.
• Clicking button No or pressing button C can give up the command.
• To toggle between the buttons Yes and No, press button S or move the joystick left or right.
To select them respectively, click them with the touch pen or press the joystick.
Menu Tools
To Next Page
Loading...
