User Manual
6
Calibration and Repair Philosophy
To ensure the accuracy and reliability of the THERMOPRO
TM
TP8 IR Thermal Camera, it is
highly recommended that the instrument be calibrated at 12 monthly intervals
Calibration or repair for the instrument can be obtained by either contacting the address/
telephone number on the cover of this User Manual, or by email to the following addresses:
overseas@guide-infrared.com
Caution
The THERMOPRO
TM
TP8 IR Thermal Camera does not incorporate any user serviceable parts.
Never attempt to disassemble or modify the camera. Opening the unit invalidates the warranty
Technical Support
Technical support for your Wuhan Guide Thermal Imaging System can be obtained by either
contacting the address / telephone number on the cover of this User Manual or by email to the
following address: overseas@guide-infrared.com
Feedback to Us
We have tested and verified the information in this manual to the best of our abilities. Yet as
we are committed to continuous development and progress, you might find features of the
product have been changed since the time of printing. You are appreciated to let us know
about any error you find, and your suggestions for further editions by either contacting the
address/telephone number on the cover of this User Manual or by email to the following
address: overseas@guide-infrared.com
To Next Page
Loading...
