User Manual
75
main menu, choose option Function under submenu Parameter and then set sub-option
BlueTooth to be Off.
• Power off the headset after use.
Note: When using the headset to work with the camera, please ensure the plastic
Bluetooth window at the bottom of the camera back faces you directly. Also please do not
keep the headset far away from the camera.
Video Output
• The camera offers 3 modes of video output: VGA, PAL and NTSC. VGA always existing
after powering on the camera (video on the LCD screen and OLED viewfinder is VGA).
PAL and NTSC are available upon setup.
VGA output:
• When the camera and the VGA display device to be used are powered off, properly
connect them with the VGA cable
• Power on the camera and the VGA display device
• Set sub-option VideoOut in option System under submenu Parameters to be Off, save the
setup and return to live image
• Now you can view the live VGA video on LCD screen, OLED viewfinder and the VGA
display device
VGA &PAL output or VGA & NTSC output:
• When the camera and the TV video display device to be used are powered off, properly
connect them with the RS232/ TV video cable
• Power on the camera and the TV video display device
• Set sub-option VideoOut in option System under submenu Parameters to be PAL or NTSC,
save the setup and return to live image
To Next Page
Loading...
