Guide ThermoPro TP8 - Installing Camera USB Driver

User Manual
77
• To transfer data saved in the built-in flash memory of the camera to PC, connect the
camera to PC through the USB extension cable. Then run the software Guide IrAnalyser
®
to download data into PC.
• Live video recording and real-time control over the camera are also available with the help
of Guide IrAnalyser
®
software.
Note: It is recommended to create a new folder in your PC to save the transferred data.
• For more information, pls refer to the user manual of Guide IrAnalyser
®
software.
Installing the Camera USB Driver to PC
Before installing the USB driver, ensure the camera and your PC are working and your PC
offers at least one USB2.0 port
• When there is no menu in the live thermal image, properly connect the USB interfaces of
the camera to a USB2.0 port of your PC with the USB extension cable
• Microsoft
®
Windows launches a Found New Device Wizard to guide you to install the
driver as follows: