User Manual
52
• To move each spot after selecting it, click it with the touch pen, drag it to a desired position
and then release it; or move the joystick up, down, left or right to a desired position and
then release it. The spot temperature shown in the status bar will change accordingly as
the spot moves.
• It is possible to change the spot number from 1 to 8. This is done by setting the value of
sub-option SpotNum in option Analysis under submenu Parameter and then choosing
button OK to confirm the setup. After this, a corresponding number of spots will be
available in the spot analysis.
• Press button C to exit and return to the live or zoomed or frozen or save image.
To Next Page
Loading...
