© Guldmann GB-1394/11/08
81
4. electrIcal connectIon
Transformer for GH2
(only for midi-rails)
1. Primary 100-230 V.
2. Secondary 24 V AC, 40 V A.
3. Connect the wires to the charging liners via the lock
for charging liner. The wires can be placed optionally.
Charger for GH2
(only for mini-, maxi-, and jumbo-rails)
1. Primary 100-230 V.
2. Secondary 24 V DC. Output for batteries: 27.6 V DC.
4. Connect the secondary wire of the charger to the wire
from the charging station. Via a cable connector.
Please note!
The polarity, + to +, must be respected for DC/charger.
(+ is on the right side when the hoist runs into the
charging station).
The main lead must be cut down to the appropriate size.
Transformer/charger
To Next Page
Loading...
