© Guldmann GB-1394/11/08
49
3. InstallatIon
Wall fitting
Wall type: Brickwork, concrete and light concrete
Bracket types: GH wall bracket, GH side-hung bracket
• Mark the spots where the fittings are to be fitted.
Use laser equipment to determine height placement
so that the wall brackets are positioned horizontally.
• Drill holes for the recommended fastening elements.
Max 250 kg (550 lbs)
More than 250 kg (550 lbs)
• The clamp is led through the oval hole at the top of the
wall bracket and is fitted using a facet disc and locking
nut against the wall bracket.
• When the rails have been fitted to the brackets, tighten
the locking nut securely.
• Finish by fitting plastic covers onto bolts and nuts.
Max 250 kg (550 lbs)
More than 250 kg (550 lbs)
Fitting of brackets
To Next Page
Loading...
