GW Instek GDM-8351 - Page 147

APPENDIX
147
Resistance
[1] [2]
Range
Resolution
full scale
Current
source
Accuracy (4W)
100.000Ω
0.001Ω
120.000
1mA
0.05% + 8
1.00000KΩ
0.00001KΩ
1.20000
1 mA
0.05% + 5
10.0000KΩ
0.0001KΩ
12.0000
100μA
0.05% + 5
100.000KΩ
0.001KΩ
120.000
10μA
0.05% + 5
1.00000MΩ
0.00001MΩ
1.20000
1μA
0.05% + 5
10.0000MΩ
0.0001MΩ
12.0000
0.5μA
0.3% + 5
100.000MΩ
0.001MΩ
120.000
0.5μA//10M
3.0% + 8
[1] Specifications are for 4-wire resistance measurement, or 2-wire resistance
measurement using the REL function. Without the REL function, add 0.2 Ω
additional error when using 2-wire resistance measurement.
[2] When measuring resistances greater than 500kΩ, please use shielded test
leads to eliminate the noise interference that may be induced by standard test
leads.
AC Voltage
[1] [2]
Range
Resolution
Full
Scale
20 Hz to
45 Hz
45 Hz to
10kHz
10 kHz to
30 kHz
30 kHz to
100 kHz
100.000mV
0.001mV
120.000
1% + 100
0.3% + 100
1.5% +300
5% + 300
1.00000 V
0.00001V
1.20000
1% + 100
0.2% + 100
1% +100
3% + 200
10.0000 V
0.0001V
12.0000
1% + 100
0.2% + 100
1% +100
3% + 200
100.000 V
0.001V
120.000
1% + 100
0.2% + 100
1% +100
3% + 200
750.00 V
[3]
0.01V
765.00
1% + 100
0.2% + 100
1% +100
3% + 200
[1] Specifications are for sine wave inputs that are greater than 5% range.
[2] Rate in Fast, Input ACV Frequency > 200Hz.
[3] The specifications are guaranteed to an input of 750V. A beeping alarm will
go off when the input value is higher than 750V.