GW Instek MSO-2000EA - Page 243

ARBITRARY WAVE GENERATOR
243
Exit Normal Edit
5. Press Go Back to exit the Normal
Edit.
Function Edit
6. Press Function Edit to perform
more advanced editing functions.
7. Press Edit Method to
choose the editing
method:
Edit Method:
Point/Line
Diagonal
Scale
Copy/Paste
Clear
8. Press Action to begin using the
selected editing method:
Point/Line:
a. Press Point/Level once to select
the point’s X-axis start point.
Press Point/Level again to
select the amplitude (Level)
Point
1 ~ user-defined point position
Level
±1.25Vdc (Load: 50Ω)
±2.5Vdc (Load: High Z)
b. Press Length to set the length
of the line.
Length
0 ~ user-defined point length