MSO-2000E & 2000EA User Manual
242
4. Press Normal Edit to insert a point
or delete a point from the
waveform:
To insert a point, you must first set the position
of the point to be inserted.
a. Press Point to set the x-axis
position of the point.
1 ~ user-defined point position
b. Press Level to set the
amplitude of the point. The
max/min amplitude depends
on the waveform amplitude
settings, see page 227.
±1.25Vdc (Load: 50Ω)
±2.5Vdc (Load: High Z)
c. Press Insert Point. The inserted
point will increase the length
of the waveform by one point.
d. Press Delete Point to delete the
point set with the “Point”
soft-key.
The overall length of the
waveform will be shortened
by one point.
To Next Page
Loading...
