PSU Series User Manual
190
13. Click the Configuration icon,
14. Click on I/O Settings.
15. Make sure the Enable Termination Character
check box is checked, and the terminal
character is \n (Value: xA).
16. Click Apply Changes.
17. Click the Input/Output icon.
18. Enter *IDN? in the Select or Enter Command
dialog box if it is not already.
19. Click the Query button.
20. The *IDN? query will return the Manufacturer,
model name, serial number and firmware
version in the dialog box.
GW-INSTEK,PSU40-38,TW123456,T0.02.20131205
To Next Page
Loading...
