HQ Pro-Stitcher User Manual07/23/128.2 Settings Menu
If Tie O options are turned on, the Pro-Stitcher
will perform a tie o at the jump start and end
points, regardless of which jump method is
performed. If the Pullup feature is turned on, the
Pro-Stitcher will perform a pull up at the end of the
jumps that exceed the Auto Jump threshold.
Stitches Per Inch
Change the value in the Stitches Per Inch box to set
the desired stitch length (Figure 8.3).
Figure 8.3
To Next Page
Loading...
