62 4000670450 E 04.19 USA / GB
D
- Operation instructions
3632T - HTT13
Prior to operation :
• Read, understand and obey all instructions and safety precautions in this manual and
attached to the aerial work platform.
• Read, understand and obey all Federal, State and local codes and regulations.
• Become familiar with the proper use of all controls and emergency systems.
• Position the aerial work platform at the work area. Make sure the aerial work platform is on
a firm and level surface and there are no potential hazards such as overhead obstructions
or electrically charged conductors. Do Not operate the aerial work platform if such hazards
exist.
• Apply the aerial work platform parking brake or chock the wheels.
• Lower the TONGUE JACK / DOLLY WHEEL and unhitch the aerial work platform from tow
vehicle.
• Release the boom travel latch by raising the latch handle and swinging the clasp down.
Boom Travel Latch
Failing to unhitch the aerial work platform before operation may lead to damage to equipment or tow
vehicle and makes the aerial work platform unstable; this could result in death or serious injury.
To Next Page
Loading...
